#Current altitude install#
#Current altitude serial#

I haven't touch throttle_max because I already see high amps draw during rescue ( I use Li-ion mainly ), I will need to check this more too. This rigs I'm testing are quite heavy 7' ( AUW 1.3-1.6Kg ).

I usually set Rescue angle same as FPV camera. No you are right about gps_rescue_ground_speed I will check that out. No response Add any other context about the problem that you think might be relevant here GPS Beitan BN-880 not using SDA SCL How are the different components wired up Set gps_rescue_allow_arming_without_fix = ONĬurrently active IO resource assignments: Set gps_rescue_sanity_checks = RESCUE_SANITY_FS_ONLY Done! # diff # version # Betaflight / STM32F7X2 (S7X2) 4.2.11 / 20:29:32 (948ba6339) MSP API: 1.43 # config: manufacturer_id: CLRA, board_name: CLRACINGF7, version: c2b8c0d3, date: # start the command batch 23:54:10 - Flight controller info, identifier: BTFL, version: 4.2.11

#Current altitude serial#

23:54:10 - Serial port successfully opened with ID: 1 Please close the configurator window before updating.

#Current altitude install#

Furthermore, some features of the firmware will only be configurable in CLI.īetaflight Configurator version is available for download online, please visit this page to download and install the latest version with fixes and improvements. Using a newer version of the firmware with an outdated version of Configurator means that changing some settings will result in a corrupted firmware configuration and a non-working craft. 23:54:03 - You are using an outdated version of the Betaflight Configurator. 23:54:03 - Using cached release information for configurator releases.

to the home direction but it waits some seconds doing nothing and loose altitude, after that it starts the rescue but it's not gaining altitude at all. GPS rescue mode set in Current Altitude Mode Expected behavior Is rescue in current altitude mode changed from 4.1.x to 4.2/4.3 ? can I compensate changing some parameters in CLI? I'd like the quad to rotate and gain altitude ( initial altitude ? ) fast, even if I'm not in maximum altitude mode, is it possibile?Įnable Rescue mode with a switch on the radio. When Rescue starts ( from Radio switch ) the quad correctly rotates fast to home direction, but it drifts for some seconds and sometimes it looses altitude a lot, I mean 20/30/40 meters, than it raise up but everything seems extremely slow and random. My GPS rescue mode is Current alture not maximum. Tested with 3 quads with Beitan BN880 and Matek m8q-5883 Betaflight 4.2 and 4.3. I'm writing here because I'm noticing a weird behaviour in BF 4.2 and 4.3 GPS Rescue mode.